HOME
PAVING STONES
POOL COPING
NATURAL STONE STEPS
JUMBO SLABS
ABOUT US
PATIO PAVERS
WALL COPING
RISERS / FILLERS
INTERIOR TILES
EMAIL
FLAGSTONE
STEP TREADS
CURBS
BACKSPLASH
24/7 (416) 892-7508
OUTDOOR TILES
PIER CAPS
COBBLESTONES
FIREPLACE STONE VENEERS


Mix-Can Construction Products

Mix Can Glossy Sealer - Glossy Sealer for Natural Stones

Mix Can Sealmix G200 is a high performance solvent based sealers, designed to protect and enhance the color of natural stone such as honed limestone, flagstone, split-faced, rough, flamed, sandblasted, slate, quartzite, structured and dimensional stone. Sealmix Gloss 200 consist of high pure quality resins and solvent to guarantee durability, UV Protection, superior protection against stains (tar, oil, dirt, rubber, etc.), all weather conditions and yellowing. Along with great resistance to, freeze / thaw, acid rain and salt.

Mix Can Matte Sealer - Matte Sealer for Natural Stones

Mix Can Sealmix M100 is a high performance solvent based sealers, designed to protect and enhance the color of natural stone such as honed limestone, flagstone, split-faced, rough, flamed, sandblasted, slate, quartzite, structured and dimensional stone. Sealmix Matte 100 consist of high pure quality resins and solvent to guarantee durability, UV Protection, superior protection against stains (tar, oil, dirt, rubber, etc.), all weather conditions and yellowing. Along with great resistance to, freeze / thaw, acid rain and salt.

Mix Can Interlock Sealer - Matte Sealer for Unsealed Interlock Pavers

Sealmix SG1 (for unsealed surfaces) is a high performance solvent based sealer, designed to beautify and protect interlock pavers, stamped concrete and other concrete surfaces. Only quality acrylic resins are used in the manufacturing of Sealmix SG1 to guarantee durability, UV Protection, Superior protection against stains (tar, oil, dirt, rubber marks, etc.) yellowing and all weather conditions; along with great resistance to, freeze / thaw, acid rain and salt.

Mix Can Interlock Sealer - Matte Sealer for Recoating Interlock Pavers

Sealmix SG2 (for previously sealed surfaces) is a high performance solvent based sealer, designed to beautify and protect interlock pavers, stamped concrete and other concrete surfaces. Only quality acrylic resins are used in the manufacturing of Sealmix SG2 to guarantee durability, UV Protection, Superior protection against stains (tar, oil, dirt, rubber marks, etc.) yellowing and all weather conditions; along with great resistance to, freeze / thaw, acid rain and salt.

Mix Can Grey Polymeric Sand - Grey Joint Sand

Mix Can Grey Polymeric Sand is a very quick and easy to use, ideal around pools & spa, steep sloping areas, driveways, walkways, patios, stamped concrete and other outdoor surfaces. After being applied dry into the pavement joints, it will start to harden after moistening and it will resist erosion due to weather & traffic.

Mix Can Beige Polymeric Sand - Beige Joint Sand

Mix Can Beige Polymeric Sand is a very quick and easy to use, ideal around pools & spa, steep sloping areas, driveways, walkways, patios, stamped concrete and other outdoor surfaces. After being applied dry into the pavement joints, it will start to harden after moistening and it will resist erosion due to weather & traffic.

Mix Can Black Polymeric Sand - Black Joint Sand

Mix Can Black Polymeric Sand is a very quick and easy to use, ideal around pools & spa, steep sloping areas, driveways, walkways, patios, stamped concrete and other outdoor surfaces. After being applied dry into the pavement joints, it will start to harden after moistening and it will resist erosion due to weather & traffic.

MixBond Mortar - Polymer Modified Cement Mortar

MixBond is one component, standard grade polymer modified cement flagstone tile mortar, and it's especially designed to improve the bonding and flexibility characteristics over most surfaces. MIXBOND can also be used both as thin and medium bed mortars for wide range of tile installations. MIXBOND meets or exceeds ANSI A118.4 and ANSI A118.11 requirements when mixed with water. Installation of ceramic and porcelain tile, quarry, sandstone paver, limestone pavers, granite pavers, saltillo, mosaic, slate, precast terrazzo, marble, granite and natural stone on wall and floor surfaces of concrete, masonry, brick, cement board, terrazzo, exterior grade plywood and gypsum board (interior dry areas only).

MixBond Plus Mortar - Polymer Modified Cement Mortar

MixBond Plus is a premium grade multipurpose polymer modified thin set mortar, high performance, one component, non-sagging, freeze/thaw, formulated with high dry polymer content to provide superior and exceptional bond strength and flexibility. It can be used for interior / exterior, residential and commercial on wall and floor. MIXBOND PLUS meets or exceeds ANSI A118.4 and ANSI A118.11 requirements when mixed with water. MIXBOND-PLUS is used for installation of Large format tile, Porcelain, ceramic, quarry tile, indian flagstone pavers, saltillo tile, slate, precast terrazzo, mosaic, and most types of marble, granite and natural stone over concrete, masonry, terrazzo, cement backer Units (CBUs), Exterior grade plywood and gypsum board (interior dry areas only), existing surfaces of properly prepared tile (interior dry areas only), properly prepared non-cushion sheet vinyl flooring, VCT or cutback adhesive residue.

MixFlex Mortar - Large Format Tile Cement Mortar

Mix Flex is premium quality, ultimate performance, sag / slump-resistant medium–bed and thin set mortar, universal single-component with high unique polymer content that provides unparalleled and ultimate bond strength and flexibility for the most demanding installation requirements for commercial, residential and industrial, exterior and interior, freeze thaw, water-submerged and pools and heavy traffic durability. MIXFLEX exceeds ANSI A118.4, ANSI A118.15 and ANSI A118.11 requirements when mixed with water. MIXFLEX is used for installation of porcelain tile , ceramic tile, cultured stone, backsplash tiles, mosaics, glass tile, quarry tile, square cut flagstone pavers, saltillo tile, precast terrazzo, slate and most types of marble, granite and natural stone and other difficult to bond tile and stone on horizontal, vertical and countertop installations in dry and wet area over concrete, masonry, terrazzo, cement backer Units (CBUs), exterior grade plywood and gypsum board (interior dry areas only), Existing surfaces of properly prepared tile (interior dry areas only), properly prepared non-cushion sheet vinyl flooring, VCT or cutback adhesive residue.

MixGrout Sanded - Polymer Modified Sanded Grout

Mix Grout Sanded is a premium grade polymer modified sanded Portland cement tile grout, one component dry blend consisting of Portland cement, silica sand, selected polymers, and other special chemicals that require the addition of water for mixing. It is designed for grouting all types of wall and floor tiles. MIXGROUT SANDED meets or exceeds ANSI Exceed A118.6 ANSI standards requirements when mixed with water.

MixGrout Unsanded - Polymer Modified Unsanded Grout

Mix Grout Unsanded is a premium grade polymer modified unsanded cement tile grout, one component dry blend consisting of Portland cement, fine aggregates, selected polymers, and other special chemicals that require the addition of water for mixing. It is designed for grouting all types of wall tiles at joint widths of 1.5 to 3 mm (1/16" to 1/8") in dry and wet areas. MIXGROUT UNSANDED meets or exceeds ANSI Exceed A118.6 ANSI standards requirements when mixed with water.

Mix Can Acrylic Latex - Cement Glue

Mix Can LT-100 is an acrylic based polymer latex additive used to improve the performance of cementitious mortars, plasters, stuccos, concrete mixes and dry set mortars as well as Mixfloor, Mixmaster and Mixbond tile mortar. It is specifically designed to improve bond strength, flexural strength, elongation and freeze / thaw durability. LR-100 meets or exceeds ANSI A118.4 and ANSI A118.11 bond strength requirements. LR100 + Mixfloor, Mixmaster or Mixbond mixes gives excellent adhesion to ceramic and porcelain tile, quarry tile, pavers, saltillo tile, and most types of marble, granite and natural stone on most wall and floor of Interior and exterior residential and commercial surfaces, and can be mix with all types of cement mortars and concrete mixes to improve the performance, bond strength and flexural strength.
Looking for Something, But Can't find it on this Page. Contact Us and We'll Do Our Best to Source It for You.
Zara Natural Stones Inc., offers the Mix-Can Construction Materials Product Line..

For ideas on how to....., please visit our Blog section.

SPECS -
Mix Can G200 Natural Stone Gloss Sealer,
Mix Can M100 Natural Stone Matte Sealer,


AVAILABLE - Mix-Can Construction Materials

Texture / Finish
Natural Top Surface, Honed, Polished, Brushed, Flamed, Sandblasted

Edges
Smooth Rounded Bullnose Facing, Rockfaced, Sawn

Sizes:
Steel Cans -
Plastic Buckets -
Paper Bags -
Plastic Bags -

Thickness
50mm / 2"

Variation
Due to natural stone characteristics, some variation in shade is inevitable.

    Sealer
    Beige Polymeric Sand
For prices, please call us or send an EMAIL with details including the Item #, quantity and pick up date.



All Contents © 2015 Zara Natural Stones Inc. All Rights Reserved.